AVAILABLE IN BLACK OR ORANGE
SELECT AN ICON TO LEARN MORE
FOOTSWITCHABLE ATTENUATOR CONTROL
Cranked amp tones at ‘conversation volumes’. The Attenuator circuit is located after the master volume controls and determines when and how the amp distorts after the preamp stage. This means the overall volume level can be reduced, whilst keeping control over the entire amp’s clipping characteristics. Unlike a loadbox, our design ensures the all-important relationship between the output transformer and the speaker remains intact so, even at very low volumes, the amp remains springy and responsive. Turning the Attenuator control clockwise reduces the overall output level (i.e. increases the attenuation), which can be remotely defeated via a footswitch for a volume boost on either channel for lead lines.
FOOTSWITCHABLE VALVE DRIVEN SPRING REVERB
Driven by an ECC83/12AT7 valve and a custom transformer, the spring reverb circuit in the MKIII has undergone significant upgrades. Brighter and more controllable than its predecessor, this lush spring reverb circuit covers everything from ‘air’ to full-on surf.
HIGHLY VERSATILE TWIN CHANNEL DESIGN
The original Rockerverb gained a cult following on account of its iconic high gain tones. The MKIIIs of course continue this tradition, but these amps are immensely flexible. The Dirty channel goes anywhere from clean to crunch to the very heaviest modern saturation, and always maintains outstanding clarity. The non-master volume Clean channel has been re-engineered to take on a more ‘sparkly’ and ‘crisp’ nature but with greater control through a revoiced two band EQ section. The MKIIIs have even greater headroom and volume in full power mode should you need it, but this can now be manipulated with the amp’s output power and Attenuator controls.
VALVE BUFFERED FX LOOP
For the purist who loves their pedals, our highly transparent effects loop is buffered by a single ECC81/12AT7, ensuring an all-valve signal path from input to output.
SWITCHABLE OUTPUT POWER
Switching the amp’s output power allows for more control over the headroom and breakup from the output valves. Reduce the output for greater output valve clipping and saturation at lower volume levels. The Rockerverb 50 MKIII features a ‘half power’ mode which drops the plate voltage on the output valves, reducing the output power to 25 Watts.
|Features:||Twin channel Class A/B guitar amp head, footswitchable valve driven reverb, valve buffered effects loop, footswitchable attenuator & selectable output wattage|
|Top Panel (Right to Left):||Input, Clean Channel: Volume, Bass, Treble | Dirty Channel: Gain, Bass, Mid, Treble | Reverb, Attenuator | Clean/Dirty selector, Full/Standby/Half Power, Mains switch|
|Finish Options:||Orange or Black basket weave vinyl|
|Output Power:||50 Watts: Full Power|
25 Watts: Half Power
|Speakers Outputs:||1×16 Ohm or 1 x 8 Ohm or 2 x 16 Ohm|
|Valves:||Preamp: 4 x ECC83/12AX7 & 2 x ECC81/12AT7|
Power Amp: 2 x EL34
|Unboxed Dimensions (W x H x D):||55 × 27 x 28cm (21.65 x 10.63 x 11.02in)|
|Unboxed Weight:||20.75kg (45.75lb)|
|Country of Manufacture||England|