You've added an item to the cart! ×

Welcome to Orange

Thank you for choosing Orange.

Since 1968, when the company was founded, Orange Amplification has been researched and developed by the guitarist for the guitarist. Today, with a team of the industry’s most dedicated engineers, it continues to test the boundaries of conventional pedal design to bring you the latest range of effects.

Orange’s commitment to quality control, construction and craftsmanship is long established, and each pedal design passes through a rigorous test procedure before shipping, resulting in complete confidence that you will be delighted with your new purchase, and that it will provide you many years of enjoyment and reliability.

This web page contains valuable technical and safety information. Please take the time to read these instructions and warnings, as the information will enhance the performance and longevity of your pedal.

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water or other liquids.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarised or grounding-type plug. A polarised plug has two blades, with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for a replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING! TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.

Where indicated or stated on the product/unit, this device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for digital devices of its class, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or a qualified technician for help.

Note: Changes or modifications not expressly approved by Orange Music Electronic Company, Ltd. could void the user’s authority to operate the equipment.

For customers in Canada: Where indicated or stated on the product/unit, this digital apparatus complies with Canadian Interference Regulations CAN ICES-3(B)/NMB-3(B).

All products are certified and tested to relevant safety standards. For further information, please contact us at orangeamps.com/contact.

Fur Coat — instructions for use

1
2
3
4
5
6
7
8
9
10
1

Volume

2

Fuzz

3

EQ

4

Octave

5

Output

6

Input

7

Octave switch

8

Fuzz switch

9

LED

10

9–12 V DC power

1.VOLUMEAdjusts the output volume
2. FUZZAdjusts the level of fuzz gain
3. EQControls the “tone” of the pedal, bringing in more treble as the level gets higher.
4. OCTAVEAdjusts the volume of the upper octave to the tone when the Octave switch is engaged.
5. OUTPUTInsert a shielded quarter-inch instrument cable leading to the “input” jack of your amplifier, or to the “return” socket of your amplifier’s effects loop.
6. INPUTInsert a shielded quarter-inch instrument cable, either from your guitar or from the “send” socket of your amplifier’s effects loop.
7. OCTAVE SWITCHDepress switch to add an upper octave to the tone. Depress again to return the original tone, without the upper octave.
8. FUZZ SWITCHDepress switch to engage pedal. Depress again to bypass the effect.
9. LEDThe LED will illuminate when the pedal is engaged
10. 9–12 V DC inputUse a regulated AC–DC adaptor fitted with a centre-negative plug (2.1 mm)

IN USE

The Fur Coat is a fully controllable old-school fuzz pedal inspired by the Foxx Tone Machine. Always place it first in the signal chain with no buffer as a passive additional guitar pickup. When running the Fur Coat in a clean channel, the EQ should be set to half way or lower. If running the Fur Coat into a dirty channel, set the EQ higher than half way. If the Octave knob is set to less than full, the amount of upper octave added to the tone can be controlled using the guitar volume. Depending on your location, fuzz pedals can pick up radio signals — this is completely normal.

REPLACING THE BATTERY

The Getaway Driver is powered by a single 9 V (PP3/6F22) battery. To replace the battery, unfasten the four screws on the ends/sides of the pedal that secure the base. Remove the base and replace the battery, ensuring it is firmly secured in the metal clip. Be sure to observe the battery’s polarity (+ vs. –).

IMPORTANT NOTE

The Fur Coat can be powered by 9 V DC. A regulated DC power supply fitted with a​ centre-negative​ ​plug​ ​(2.1 mm) must be used. Running the pedal at 12 V will increase the headroom and the output volume available.