120 WATTS | CELESTION NEO CREAMBACK SPEAKERS | LIGHTWEIGHT PLYWOOD

PPC212 V

Orange has been for 50 years at the forefront of cabinet design, our rugged PPC412 cabinet has become an industry standard.

The PPC212V is our first vertical cabinet and has been designed to be as light as possible without compromising tonal response.

Constructed from 15mm Birch Plywood it’s light and compact but robust enough to withstand the rigours of touring. The PPC212V has Celestion Neo Creamback speakers and an open back construction, keeping the weight down while still retaining the tonal excellence you would expect from an Orange cabinet.

LIGHTWEIGHT CONSTRUCTION

We’ve sourced the best quality Birch Plywood and lightweight Celestion Neo Creamback speakers to make the PPC212V one of the lightest 2 x 12 speaker cabinets available.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968.

VERTICAL SPEAKER CONFIGURATION

To be used in conjunction with our Terror range the Vertical cabinets give you Orange tone in a small scale size.

“After 17 years of playing, fine tuning, reorganizing, modding, breaking, fighting, and exploring other gear, I finally got my hands on a full Orange rig for our reunion shows in 2016. Hindsight being 20/20, I’m left scratching my head as to why I ever used anything else. I’m more excited than ever about the sounds we make.”

“When I made the change to the PPC212V, suddenly life just got a little bit easier. Being as light as it is (under 20kg) but without losing any tone quality is just impressive, especially for those that don’t have a team of roadies. I love having a vertical cab in my studio too, it’s much easier to mic and I personally think it just sounds better in the room.”

FeaturesStraight front, open-back vertical compact 2×12 |15mm Birch Plywood| 2 x parallel ¼” input jacks| hard wearing woven paper grille cloth | skid runners
Power Handling120 Watts (Mono)
Speakers2 x 12″ Celestion Neo Creamback
Impedance16 ohm
Unboxed Dimensions (W x H x D)54.5 x 70 x 30 CM (21.46 x 27.56 x 11.81″)
Unboxed Weight19.95kg (43.98lbs)

240 WATTS | CELESTION VINTAGE 30 SPEAKERS | 18MM BIRCH PLY

PPC412AD

The PPC412AD is the angled-front version of the hugely popular PPC412 4×12 cabinet. With four Celestion Vintage 30 speakers, the slanted baffle produces rich mids and crisp, sparkling highs with outstanding vertical projection. These cabs conquer the problem of poor on-stage monitoring, whilst dispersing the sound in more directions than a conventional cabinet. The PPC412AD shares the same constructional techniques and materials as the straight-front version. Each PPC412AD is made in England from high density, 13 ply 18mm Baltic birch plywood and fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response, whilst our signature paper grille cloth contributes to the unmistakable magic of the Orange 4×12.

Fantastic Sound Dispersal

The slanted baffle of the PPC412AD  produces rich mids and crisp, sparkling highs with outstanding vertical projection. These cabs conquer the problem of poor on-stage monitoring, whilst dispersing the sound in more directions than a conventional cabinet.

Celestion Vintage 30 Speakers

Superb tones and a tight response require a first rate speaker.

Classic Orange Styling

Finished in our legendary livery dating back to 1968, the PPC412AD features our basket weave vinyl, woven speaker grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

“Once I got an Orange Amp. That was the missing piece to fulfilling that perfect tone I have had in my head forever.”

Features18mm high density Baltic birch plywood | Angled baffle | 2 x Parallel Jacks for ‘daisy-chaining’ to another 16 Ohm Cabinet (total impedance = 8 Ohms) | Hard wearing woven paper grille cloth | Skid runners | steel hardware
Power Handling (Cabinets)240 Watts
Speakers (Combos and Cabinets)4 x Celestion Vintage 30
Impedance (Cabinets)16 Ohm (Mono)
Unboxed Dimensions (W x H x D)77 x 74 x 36.5cm (30.31 x 29.13 x 14.37″)
Unboxed Weight45.3Kg (102.51lb)

240 WATTS | CELESTION VINTAGE 30 SPEAKERS | 18MM BIRCH PLY

The Ultimate 4×12″

With formidable construction and a tight, unflappable sound, the PPC412 has achieved near-legendary status in guitarist circles. The PPC412 is our classic full-sized ‘straight-front’ 4×12″ cabinet with a signature delivery that has made it a mainstay of touring artists across the globe. Built to last using extremely rugged construction and manufacturing techniques, all PPC412s are made in England (except the USA who receive cabinets from our USA factory) from high density, 13 ply 18mm Baltic birch plywood and fitted with steel hardware to withstand the rigours of the road. Our unique skid feet design helps to acoustically couple our cabinets to the stage for an improved bass response, whilst our signature paper grille cloth contributes to the unmistakable magic of the Orange 4×12. Housing four Celestion Vintage 30 speakers in a closed-back shell, the PPC412 exhibits a focused tone that’s full of warm midrange. Don’t take our word for it, though. Just look to the legions of players for whom nothing else but an Orange PPC412 will do.

BUILT FOR A LIFE ON THE ROAD

With formidable construction and a tight, unflappable sound, the PPC412 has achieved near-legendary status in guitarist circles. The PPC412 is our classic full-sized ‘straight-front’ 4×12″ cabinet with a signature delivery that has made it a mainstay of touring artists across the globe.

CELESTION VINTAGE 30 SPEAKERS

Superb tones and a tight response require a first rate speaker.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968, the PPC412 features our basket weave vinyl, woven speaker grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

“For me, they’re just the best cab I’ve ever gone through”

FeaturesStraight front, closed-back 4×12 | 18mm high density Baltic birch plywood construction | 2 x parallel ¼” input jacks for daisy-chaining to another 16 Ohm cabinet (total load = 8 Ohms) | hard wearing woven paper grille cloth | skid runners
Power Handling 240 Watts (Mono)
Speakers 4 x Celestion Vintage 30
Impedance 16 ohm
Unboxed Dimensions (W x H x D)78 x 74 x 37 CM (30.71 x 29.13 x 14.57″)
Unboxed Weight46.5 KG (102.514 lb)

120 WATTS | CELESTION VINTAGE 30 SPEAKERS | 18MM BIRCH PLY

MAXIMUM IMPACT FROM A 2×12

Our imposing PPC212 is a closed-back 2×12″ cabinet equal in width to the PPC412. Featuring two Celestion Vintage 30 speakers, the PPC212 is in essence our classic 4×12 slashed in half. The large internal volume of the sealed enclosure makes the PPC212 ideal for players looking for the the fattest possible tone when a 4×12″ would be too large. Many players choose to stack two PPC212 cabs for ease of load-in, also giving them the flexibility of using just one for smaller venues. Made in England from high density 13 ply 18mm Baltic birch plywood, the PPC212 is fitted with steel hardware to withstand the rigours of the road. Our unique skid runners fitted to the base helps to acoustically couple our cabinets to the stage for a fuller low end response.

Built for a Life on the Road

With formidable construction and a tight, unflappable sound, the PPC212 is essentially a PPC412 cut in half allowing ease of use in smaller venues while retaining the fattest possible tone.

Celestion Vintage 30 Speakers

Superb tones and a tight response require a first rate speaker.

Classic Orange Styling

Finished in our legendary livery dating back to 1968, the PPC212 features our basket weave vinyl, woven speaker grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

“This ain’t your Daddy’s blues. It’s the next generation. It gets airborne. It’s fueled by Orange.”

FeaturesSTRAIGHT FRONT, CLOSED-BACK 2×12 | 18MM BIRCH PLYWOOD CONSTRUCTION | 2 X PARALLEL ¼” INPUT JACKS FOR DAISY-CHAINING TO ANOTHER 16 OHM CABINET (TOTAL LOAD = 8 OHMS) | HARD WEARING WOVEN PAPER GRILLE CLOTH | SKID RUNNERS |STEEL HARDWARE
Power Handling120 WATTS (MONO)
Speakers2 x 12″ CELESTION VINTAGE 30
Impedance16 OHM
Unboxed Dimensions (W x H x D)78 x 53 x 37.5 cm (30.71 x 20.86 x 14.76″)
Unboxed Weight28kg (61.72lbs)

600 WATTS | EMINENCE SPEAKERS | 18MM BIRCH PLY

HIGHLY FOCUSED SOUND

This superb bass enclosure is made from 13 ply high density 18mm birch plywood, with tough skids on the base of the cabinet for enhanced stage protection. The skids also act to couple the enclosure to the floor, thereby increasing bass response. Internally, the enclosure is acoustically compartmented for strength and anti-vibration.

OBC410 cabs features a high-powered Eminence APT80 horn with switchable hi/lo/off located on the rear of the cab. The low position reduces the output of the horn by 6dB.

Expect a highly focused sound with tons of great low-end and mids shining through.

BUILT FOR A LIFE ON THE ROAD

Made to our famous build quality standards. The OBC410 has been designed to stand up to the rigours of touring.

EMINENCE BETA 10A SPEAKERS

Superb tone and a tight response require a first rate speaker.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968, the OBC410 features our basket weave vinyl, acoustically transparent grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

Features18mm high density birch ply, 2 x parallel ¼” and Speakon input jacks, skid design feet,
ControlsHorn attenuator
Output Power (Heads and Combos)NA
Power Handling (Cabinets)600 Watts
Valves (Heads and Combos)NA
Speaker Output options (Heads)NA
Speakers (Combos and Cabinets)4 x Eminence Beta 10A
1 x High quality HF horn
Impedance (Cabinets)8 ohm
Extension Cabinet Options (Combos)NA
Unboxed Dimensions (W x H x D)62 x 64 x 46 CM (24.41 x 25.2 x 18.11″)
Unboxed Weight 41.00 Kg (90.38lbs)

ACOUSTICALLY COMPARTMENTED | 15″ EMINENCE SPEAKER | PORTED

ACOUSTICALLY COMPARTMENTED FOR STRENGTH AND LOW VIBRATION

This superb bass enclosure is made from 13 ply high density 18mm birch plywood, with tough skids on the base of the cabinet for enhanced stage protection. The skids also act to couple the enclosure to the floor, thereby increasing bass response. Internally, the enclosure is acoustically compartmented for strength and anti-vibration. The OBC115 is side-ported, allowing for speaker self-correction.

BUILT FOR A LIFE ON THE ROAD

With formidable construction and a tight, unflappable sound, the OBC115 is built to take the rigours of touring in it’s stride.

EMINENCE 15″ SPEAKER

Superb tone and a tight response require a first rate speaker.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968, the OBC115 features our basket weave vinyl, acoustically transparent grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

Features18mm high density birch ply, 2 x parallel ¼” and Speakon input jacks, skid design feet,
ControlsNA
Output Power (Heads and Combos)NA
Power Handling (Cabinets)400 Watts
Valves (Heads and Combos)NA
Speaker Output Options (Heads)NA
Speakers (Combos and Cabinets)1 x Eminence Kappa 15
Impedance (Cabinets)8 ohm
Extension Cabinet Options (Combos)NA
Unboxed Dimensions (W x H x D)62 x 52 x 46.5 CM (24.41 x 20.47 x 18.31″)
Unboxed Weight29.5 KG (65.15 lb)

1200 WATTS | EMINENCE SPEAKERS

PLAY ANY SIZE GIG

The return of the legendary Orange OBC810 8×10″ bass cabinet originally made in very small numbers during the 1970s. Seldom seen, but often revered, this is the 8×10″ to rule them all.

1200 watt output means it can handle any size gig. 13-ply high-density 18mm birch plywood with two heavy-duty castors means it will last forever. Four acoustically-voiced compartments add strength to the design, and combined with the classic configuration of 8×10″ speakers wired to 4 ohm, this is truly an awe-inspiring cabinet that must be heard to be believed.

BUILT FOR A LIFE ON THE ROAD

With formidable construction and a tight, unflappable sound, the OBC810 is built to take the rigours of touring in its stride.

EIGHT EMINENCE SPEAKERS

Superb tone and a tight response require first rate speakers.

CLASSIC ORANGE STYLING

Finished in our legendary livery dating back to 1968, the OBC810 features our basket weave vinyl, acoustically transparent grille cloth, signature ‘picture frame’ edging and 18mm Birch ply construction.

Features18mm high density birch ply, 2 x parallel ¼” and Speakon input jacks, skid design feet, castors.
ControlsNA
Output Power (Heads and Combos)NA
Power Handling (Cabinets)1200 Watt
Valves (Heads and Combos)NA
Speaker Output options (Heads)NA
Speakers (Combos and Cabinets)8 x Custom design Eminence Legend 32 ohm ceramic
speakers
Impedance (Cabinets)4 ohm
Extension Cabinet Options (Combos)NA
Unboxed Dimensions (W x H x D)61.5 x 123 x 46 CM (24.21 x 48.43 x 18.11″)
Unboxed Weight59.4 KG (130.953 lb)

A monster spawned in the 70s that towered over the opposition back then, and still casts a long shadow even today. Crush your enemies and see them driven before you.