A TRUE CHANNEL SWITCHING TERROR

With an individual voice and character the Brent Hinds Terror is its own beast. Designed in collaboration with Mastodon’s Brent Hinds, the amp features two channels and a new gain structure that makes it a completely unique Terror.

The single control on the natural channel has been redesigned with more bottom end but retains the finely balanced and highly playable character of the Rocker series. The dirty channel has a different 3 stage gain structure. It’s brighter at lower gain levels and fattens up the more you dial the gain in. The new gain structure also means that the gain comes in more quickly.

Power switching options of 15, 7, 1 and 0.5 Watts make it perfect for bedroom, studio, and stage. Using the beefy Terror transformers, the Brent Hinds Terror is able to take full advantage of the EL84 output section, giving players the ability to create warm valve compression and saturation at neighbour friendly volume.

FROM BEDROOM TO HEADROOM
TWIN CHANNEL DESIGN
ENGINEERED TO BE PLAYED
BRENT HINDS “TATTOO” STYLING

1 2 3 4

TWIN CHANNEL DESIGN

The ‘Natural’ channel features just one control for volume and is voiced with more bottom end as per Brent’s specification. Cleaner settings produce clear, glistening tones whilst cranking the volume brings through a darker but still very British crunch that loves to be kicked harder with boost and overdrive pedals. The ‘Dirty’ channel is more familiar with Gain, Master Volume and a three band EQ. The differently designed three stage gain structure means that the dirty channel has a brightness at lower volume levels that fattens up and you dial in the gain. (Optional FS-1 footswitch sold separately)

ENGINEERED TO BE PLAYED

At Orange, we expect our amps to work for a living. For the best possible tone and durability, this Terror uses the same proprietary transformers found in all of our iconic Terror Series (excluding the Dual Terror) Like our latest flagship valve amp heads, this Terror does away with plastic connector blocks and ribbon cables in favour of hand-soldered flying leads. The chassis-mounted switchgear is secured to the classic Terror series enclosure. As for the amp’s effects loop, we’ve opted to keep the signal path all-valve to preserve the amp’s tonal integrity.

BRENT HINDS “TATTOO” STYLING

The Brent Hinds Terror not only carries Brent’s signature it also bears his facial tattoo. The tribal imagery adorns the front of the chassis and we continue that theme on the settings markers. This amp carries Brent’s uniqueness stylistically as well as tonally.

“I’m honored and proud of how great this amp sounds! It’s a representation of my dream tone!”

Brent HindsMastodon–Watch the demo/interview

Click on the dials to Listen

Compare the different GAIN structures of the ROCKER 15 TERROR and BRENT HINDS TERROR

Brent Hinds Terror – Dirty Channel

Click to listen (All other controls are set at neutral)

Brent Hinds Terror – Clean Channel

Click to listen (All other controls are set at neutral)

Rocker 15 Terror – Dirty Channel

Click to listen (All other controls are set at neutral)

Rocker 15 Terror – Clean Channel

Click to listen (All other controls are set at neutral)

Features:	TWIN CHANNEL, VALVE BUFFERED EFFECTS LOOP, HALF POWER MODE & ‘HEADROOM/BEDROOM’ ATTENUATOR SWITCH.
Controls (Right to Left):	NATURAL CHANNEL: VOLUME ｜ DIRTY CHANNEL: GAIN, BASS, MIDDLE, TREBLE, VOLUME｜ CHANNEL SELECTOR, HALF/STBY/FULL POWER SELECTOR｜ POWER SWITCH
Valves	PREAMP: 3 X ECC83 (12AX7), 1 X ECC81 (12AT7) POWER AMP: 2 X EL84
Output Power:	0.5, 1, 7 OR 15 WATTS (SWITCHABLE)
Effects Loop:	YES (VALVE BUFFERED)
Unboxed Dimensions (W x H x D):	35.6 X 17.7 X 15CM (14.01 X 6.96 X 5.9″)
Boxed Dimensions (W x H x D)	43.9 x 25.3 x 23.9cm (17.28 x 9.96 x 9.40″)
Unboxed Weight:	6.4KG (14.10LBS)