The Clean Channel
The clean channel preamp is designed around two stages of all tube tone
and features interactive bass and treble controls. This channel is more
than capable of pushing out loud punchy clean tones and yet can still
be driven to achieve a light retro crunch.
The
Dirty Channel
An Orange amplifier with 4 stages of all tube overdrive? Yes, you got
it! The dirty channel goes from crystal clean right through shades of
vintage British to full on overdrive that provides controlled feedback
at any volume level. This channel gives you the ability to blow away your
friends hi gain amplifiers, whilst retaining the versatility of an Orange
amplifiers retro tones!
Reverb
A newly designed
tube driven, tube returned Reverb circuit gives the Rockerverb reverb a
sparkling chime never heard before from an Orange amplifier! It features
a high quality, Accutronics 3 spring reverb tank.
Effects
Loop
Tube buffered, tube returned. Orange pioneered the effects loop back in
the 1970's. So it should come as no surprise that the Rockerverb amplifiers
come fitted with the highest quality effects loop in the business. If
you have to take the signal out side of the amplifiers chassis then the
Rockerverb design ensures that it will come back in sounding crystal clear!
Tube
Failure Protection
Here's
a feature to take a weight off your mind! If you are unlucky enough to
experience a power tube failure whilst playing show, the tube failure
protection system will kick in and allow you to continue playing at half
power. This should give you enough time to swap out the tube without ruining
your performance! There is even a helpful LED to let you know which pair
of tubes has been affected!
Hi
/ Low Damping
The Rockerverb
50 features a Hi / Low damping selector. This controls the amount of current
to the power tubes. Switch it to Hi to tighten the sound of the amplifier.
Lo gives you a looser sound. |
