Rockerverb 100 Head

The Rockerverb 100 has enough power to rock the very largest of stadiums. But hidden behind it's heavy handed first appearance lies an element of subtlety often over looked my lesser amplifiers. Lets take a look at some of the features on offer...

The Clean Channel
The clean channel preamp is designed around two stages of all tube tone and features interactive bass and treble controls. This channel is more than capable of pushing out loud punchy clean tones and yet can still be driven to achieve a light retro crunch.

The Dirty Channel
An Orange amplifier with 4 stages of all tube overdrive? Yes, you got it! The dirty channel goes from crystal clean right through shades of vintage British to full on overdrive that provides controlled feedback at any volume level. This channel gives you the ability to blow away your friends hi gain amplifiers, whilst retaining the versatility of an Orange amplifiers retro tones!

Reverb
A newly designed tube driven, tube returned Reverb circuit gives the Rockerverb reverb a sparkling chime never heard before from an Orange amplifier! It features a high quality, Accutronics 3 spring reverb tank.

Effects Loop
Tube buffered, tube returned. Orange pioneered the effects loop back in the 1970's. So it should come as no surprise that the Rockerverb amplifiers come fitted with the highest quality effects loop in the business. If you have to take the signal out side of the amplifiers chassis then the Rockerverb design ensures that it will come back in sounding crystal clear!

Interchangeable Power Tubes
Feel like experimenting with your tone? Although the Rockerverb 100 comes fitted with EL34's as standard, feel free to swap out the power tubes with any of the following models:

EL34
6L6GC
KT88
6550

(When changing tubes, amplifier should be biased by a qualified technician).

Tube Failure Protection
Here's a feature to take a weight off your mind! If you are unlucky enough to experience a power tube failure whilst playing show, the tube failure protection system will kick in and allow you to continue playing at half power. This should give you enough time to swap out the tube without ruining your performance! There is even a helpful LED to let you know which pair of tubes has been affected!